 Building the Fender Well Liners!
Published 3/10/2010 - Bodywork
 Design Idea - Building the Fender WellsBuilding the Fender Wells is much easier than we thought!
After speaking with lots of people who have built the Diablo Roadster, only a few actually did the fender wells. Frankly they are really needed. Here''s the best way to do it. Go to Lowes and pick up the following materials:
Lowes Materials List:
- Reinforced Fiberglass Plastic Sheeting which comes in 4''x8'' sheets
- Flat stock steel to create the bars and wheel well arches
- Various nuts and bolts for mounting the well well fiberglass plastic
Recommendations:
- Build the wheel well liners in two or preferrably three pieces
- Use stainless steel bolts and they will need to be power coated black.
- Use washers and also rubber washers to isolate noise.
Pictures: (click to expand the view)
Check for additional articles in the listed categories on the right or from the News Article Archives...
|
))
))
))
))
